Brand | NORSEAL |
FIELD OF APPLICATION
Pyroplex® FG30 30 Minute Glazing Systems have been specifically designed for use in glazed apertures in fire resisting timber doors and steel doors.
PRODUCT FEATURES
- Supplied on continuous reels for dispensing applications, ease of storage and to reduce wastage in cut-offs.
- Supplied with a high performance self-adhesive backing for ease of application and installation.
- Pyroplex® intumescent material is totally unaffected by water, robust, ‘non-flaking’ and difficult to tear.
INSTALLATION INSTRUCTIONS
- Unwind the glazing system from the coil. Remove the release liner from the product. Fit the product to the bead.
- Mitre cut the bead [with glazing system installed] to fit the aperture.
Install one complete side of the beading system using M5 x 50mm stainless steel screws at 150mm centres. - Cut glass to fit aperture with a tolerance of +/-2mm and install.
- Repeat steps for opposite side of the door.
QUALITY APPROVAL
Pyroplex Limited has a Quality Management System that meets the requirements of ISO 9001, and is independently verified by BSI Quality Assurance under Certificate No. FM10371. Copies of this approval are available on request.
OTHER INFORMATION
End user should ensure that the door has been previously tested and certificated to accept a glazed aperture, failure to observe this guidance may invalidate the test evidence or approval for the door set assembly.
The information contained herein is based upon the present state of our knowledge. Recipients of our Pyroplex® products must take responsibility for observing existing laws and regulations.
Due to our policy of continuous improvement Pyroplex Limited reserves the right to amend specifications without prior notice.
For glass types and aperture sizes refer to the CERTIFIRE certificate of approval CF348. Copies of this approval are available on request.